BowLift | Extra-Fine Green Welding Rod – Thin-Gauge Electrode for Galvanized & Mild Steel

Extra-Fine Green Welding Rod – Thin-Gauge Electrode for Galvanized & Mild Steel (1.6mm / 2.0mm)

1.6 mm Slim Core – Ideal for 0.8–3 mm Thin Sheet

Designed specifically for light-gauge metalwork, these rods prevent blow-through on ducting, flashing, and thin steel panels. Delivers clean fusion without warping or distortion.

 

 

Green Flux Coating – Low Spatter, Smooth Slag Removal

Formulated with a special rutile-alkaline blend for quiet arc operation, reduced smoke, and fast-release slag. Spend less time grinding and more time welding.

 

 

Galvanized Steel Compatible

Weld through zinc-coated surfaces without porosity. Perfect for galvanized pipes, steel roofing sheets, and metal cladding. No need to strip coatings before use.

 

 

Beginner-Friendly Ignition & Arc Stability

Lights easily on both 110V and 220V inverters. Runs steady between 50–80 A with excellent control—ideal for new welders practicing fillets, lap joints, and seams.

 

 

Moisture-Resistant Storage Tube

Sealed PVC canister protects rods from humidity, oxidation, and hydrogen contamination. Ready to use straight out of the box with no re-baking needed.

 

 

📐 Technical Specifications

Rod Diameter	Ø 1.6 mm / Ø 2.0 mm
Length	300 mm (12 inches)
Classification	AWS E6013 / GB ER49-19
Recommended Amperage	50–80 A (AC / DC)
Polarity	DCEN / DCEP / AC Compatible
Flux Type	Rutile-alkaline, zinc-buffered
Packaging	1 kg vacuum-sealed tube (~100 pcs at Ø1.6 mm)
Recommended Use	Galvanized pipe, thin sheet, ducts, roofing panels

💬 FAQ

Q • Can I use these on a 110V inverter welder?
A • Yes, they run smoothly on 110V household machines. Start with 55–60 A on DC- for optimal arc control.

Q • Do I need to grind the zinc off first?
A • Not necessary. The flux handles light zinc layers. For thicker coatings, a wire brush helps with bead appearance.

Q • Can I weld vertically with this rod?
A • Absolutely. Use 65–70 A and a whip-pause motion to keep slag under control while climbing.

Q • How should I store them?
A • Keep rods in the sealed tube in a dry place. If exposed to moisture, bake at 250°F (120°C) for 30 minutes before use.