Skanto | For Quick Oil Changes

Skanto for Quick Oil Changes

Features:

• CHANGE OIL IN JUST MINUTES:  Skanto for Quick Oil Changes lets you perform a quick oil change in vehicles, motorcycles, campers, etc. There's no need to jack up the car, because Skanto for Quick Oil Changes extracts oil from the engine's top! It's simple, convenient, and affordable. 

INSTALLATION GUIDE:

• Turn off the engine and remove the oil cap.
  
• Insert the intake hose into the engine's oil tank.
  
• Place the outlet hose into an empty container.
  
• Connect the positive and negative clamps to the car's battery.
  
• Press the power button to activate the oil pump.

This process is very simple, and you can often do it yourself to ensure your engine runs smoothly.

 

SPECIFICATIONS:

• Dimensions: Approx. 20 x 18 x 9 cm / 7,86 x 7 x 3,5 inches
  
• Input Voltage: 12V DC
  
• Rated Current: 5A
  
• Noise Level: 70 dB
  
• Max Power: 60W
  
• Oil Flow Rate: Approx. 250 l / hr
  
• Inlet Hose Length: Approx. 120 cm
  
• Inlet Hose Outer Diameter: 6 mm / 0.236 inches
  
• Inlet Hose Inner Diameter: 4 mm / 0.157 inches
  
• Outlet Hose Length: Approx. 150 cm
  
• Outlet Hose Outer Diameter: 12 mm / 0.472 inches
  
• Outlet Hose Inner Diameter: 10 mm / 0.39 inches
  
• Cord Length: 2.5 meters

PACKAGES INCLUDE:

• 1 x Quick Oil Change Pump
  
• 1 x Outlet Hose
  
• 1 x Inlet Hose
  
• 2 x Hose Clamps
  
• 2 x Battery Clamps

NOTE:

To prevent overheating, do not operate the oil extractor for more than 30 minutes at a time. Allow it to cool down before activating it again. Avoid using the unit with these liquids: water (the pump is not lubricated), transmission fluid (too thick), and flammable liquids (fuel, gasoline, etc.).