Karnz | Tile Levelling System

• Wear-resistant and reusable. Especially recommended for DIY enthusiasts.
• Keep the tiles in a horizontal alignment.
• Optimize tile laying. Reduce installer fatigue.
• Virtually no lippage and extremely smooth.
• Reduces the need for grinding and polishing. Prevents tiles from slipping during curing.

Excellent tools for floor and wall tiles

Application Tips:

1. For the first tile, leave at least 2 mm spacing (with cross couplers). Place close to the tiles.
2. Insert the T-shaped needle into the joints between the tiles.
3. The T-shaped needle is fixed by a 180-degree rotation at the bottom of the two tiles.
4. Adjust the wedges using your hand or special wrench until the tiles are flush.
5. Approximately 5-6 hours after leveling, before the cement/adhesive has fully cured, remove the caps in opposite directions, twist out the 180° T-needle and remove it.

Product Details:

• Material: PP + 430 Stainless Steel.
• Quantity: 50 Sets/Bag + 1 Tool.
• Suitable Spacer: 2 mm – 8 mm.
• Tile Thickness: 5 mm – 20 mm.
• Color: See illustration.

Scope of delivery:

• 50x Tile Leveling Systems.
• 1x Special Wrench.

Reasons for your choice:

• The tile leveling system optimizes the laying process and reduces installer fatigue.
• Lippage-free and extremely smooth surface.
• Reduces grinding and polishing effort.
• Prevents tiles from shifting during the drying phase.
• Reusable wedges offer cost savings.

NOTE

Please note slight measurement deviations due to manual measurements.

The actual color of the product may differ slightly from the color shown due to different monitors and lighting conditions.